Varipower Bed
Varipower Bed
SKU:E-BED-PCB-300-200-24V-KIT
In stock
Couldn't load pickup availability
Vari power beds
Capable of a maximum operating temperature of 120°C, our Varipower beds are ideal for standard printing cases. If you’re looking to print at higher temperatures then please see our high-temperature beds.
Varipower beds come with leads pre-attached, ready to be connected directly to the printer mainboard. Insulation is also provided, with cork pre-attached to the underside of the bed. Pair your 3mm PCB bed with Borosilicate glass to help maintain a flat print surface.
The 300x200mm Varipower bed can be used as a direct replacement for the BigBox and ToolChanger Motion System heated beds*.
Please note:
These beds are available in 24v only.
Do not print directly on the PCB surface the use of a borosilicate glass bed is required.
If you do plan on using the Varipower bed with the ToolChanger you will need to use an additional 400w power supply to run the bed from, or source a single power supply rated to at least 600w.
⚠️ WARNING: This product can expose you to chemicals including Mineral Oils, which is known to the State of California to cause cancer, and Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.