V6 HeatBreak

V6 stainless steel HeatBreak

A replacement all-metal stainless steel V6 HeatBreak. These HeatBreaks are the standard for E3D HotEnds such as V6, Titan Aero and Titan Aqua. They feature a refined internal surface finish to reduce extrusion force and improved reliability with retractions. Available in both 1.75mm and 3mm variants.

V6 titanium HeatBreak

Titanium V6 HeatBreaks are the perfect upgrade for printing at higher temperatures, helping to maintain a sharply defined melt zone at higher temperatures.

Genuine E3D HeatBreaks feature a refined internal surface finish to reduce extrusion force and improve retraction reliability. Made from grade 5 titanium, these HeatBreaks are exceptionally strong and have lower thermal conductivity than stainless steel HeatBreaks, allowing you to keep the cold side of your HotEnd even colder. 

The increased strength of these breaks means they are also much less likely to crack or snap, either while hot-tightening or on the occasional collision with printed parts or printer bed.

Please note:

Thermal paste is not supplied with the Heatbreak, spare sachets can be purchased here

Available in both 1.75 mm and 2.85 mm variants

E3D HeatBreaks are compatible with E3D products only, we are unable to provide support if paired with 3rd party products.